Waygate Technologies Krautkramer USM 100, Operating Manual, Page: 146 / 330

5 Operation Gates
146 Rev. 9 (09/2023) Krautkrämer USM 100
Gate A Start
This function can also be set for gate B, C and IF.
You can set the starting point of the gate by entering the
exact numerical values.
Alternatively, you can move and adjust the gates direct-
ly on the touchscreen (see page 95).
Gate A Width
This function can also be set for gate B, C and IF.
You can set the width of the gate.
Alternatively, you can set the width directly on the touch-
screen by dragging the right edge (see page 95).
Gate A Threshold
This function can also be set for gate B, C and IF.
You can set the threshold of the gate by entering the ex-
act numerical values within the range of 5 … 95 %
screen height for triggering an alarm if this value is ex-
ceeded or not reached.
In RF mode, you can set the threshold also within the
range of –5 … –95 %.
Alternatively, you can adjust the threshold directly on
the touchscreen (see page 95).