14
HEADER
Steps to select the backlight shut-off :
1. Press the
ADV
button until the “
BASIC
”
icon is displayed in the upper right
corner.
2. Press and hold the
ADV
button and
“
CAL
” flashes.
3. Press the
ADV
button two more times
(In this case “L” stands for light and 10 is
ten seconds.)
4. Press the
ENT
button. The numbers next
to the “L” should flash.
5. Press the
ADV
button to step through
the shut-off selections: 10, 30, 60, or OFF.
Stop at your desired selection for the
backlight time-out.
6. Press the
ENT
button once to set your
selected time-out and “L” and the select
time-out value should flash.
7. Press
ADV
twice
to exit from
programming mode. The display should
now be in Basic mode.
If at any time during programming no
button is pressed for 30 seconds, the unit
exits out of programming mode.
The unit must be in Timer to use any of
the features described in this section.
BASIC MODE
