Waycon WAY-AX, Installation Manual, Page: 41 / 48

Seite 41 / 48
5.17. Display Menu
Parameter changes become active only after closing the menu selection.
START DISPLAY
This parameter defines the start display after switching on the device.
0 Single
Single-channel display
The source must be defined in SOURCE SINGLE
1 Dual The sources must be defined in SOURCE DUAL TOP / DOWN.
SOURCE SINGLE
0 INPUT 1
the reference source is input 1
1 INPUT 2
the reference source is input 2
2 LINKAGE 1 – 2 the reference source is the result of the linking of input1 and input 2
3 INPUT 1 TOTAL
the reference source is input 1 with totalization
4 INPUT 2 TOTAL
the reference source is input 2 with totalization
5 LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2 with
totalization
SOURCE DUAL TOP
0 INPUT 1
the reference source is input 1
1 INPUT 2
the reference source is input 2
2 LINKAGE 1 – 2 the reference source is the result of the linking of input1 and input 2
3 INPUT 1 TOTAL
the reference source is input 1 with totalization
4 INPUT 2 TOTAL
the reference source is input 2 with totalization
5 LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2 with
totalization
SOURCE DUAL DOWN
0 INPUT 1
the reference source is input 1
1 INPUT 2
the reference source is input 2
2 LINKAGE 1 – 2 the reference source is the result of the linking of input1 and input 2
3 INPUT 1 TOTAL
the reference source is input 1 with totalization
4 INPUT 2 TOTAL
the reference source is input 2 with totalization
5 LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2 with
totalization
The totalization depends on the operation mode. See chart in chapter IN 1 Totalization.