WARNING NOTICES
• Do not try to open the device. The stored energy of the spring drive may lead to injuries when being
mishandled.
• Do not touch the rope when operating the sensor.
• When mounting outdoors protect the sensor and the rope from icing at temperatures below 0 °C.
The usage of a deflection pulley may help defrosting the wire rope.
• When operating the sensor in a humid environment, install the sensor with the rope outlet
downwards. Otherwise water will gather inside the housing, which leads to corrosion. Where
applicable use option S3.
MAINTENANCE
The devices are maintenance-free. If however, the rope is soiled due to adverse environmental
conditions, it can be cleaned with a cloth drenched in resin-free machine oil.
DECLARATION OF EU-CONFORMITY
Manufacturer
WayCon Positionsmesstechnik GmbH
Mehlbeerenstrasse
4
82024
Taufkirchen
/
Germany
This is to certify that the products
Classification
draw wire sensors
Product series
SX
fulfill the current request of the following EU-directives:
EMC-directive
2004/108/EC (until April 19th, 2016)
2014/30/EU
(from
April
20th,
2016)
applied
harmonized
standards:
IEC
61326-1:2013
The declaration of conformity loses its validity if the product is misused or modified without proper
authorisation.
Taufkirchen,
24.02.2016
Andreas
Täger
CEO
