![background image](http://html1.mh-extra.com/html/wavion/wbsn-2450/wbsn-2450_user-manual_3886233026.webp)
WBSn-2450 User Guide
Page - 26 -
Parameter
Description
o
Range
•
Auto Switch
•
On
•
Off
•
Estimate Scan Time (specify)
Stop Scan button
Stops scan
Online ACS (To be available in a future release)
Optimization mode
Values:
•
Throughput
•
Range
Auto. Switch
Switches Online ACS on and off automatically
Enable/Disable
Select whether or not to run online scanning.
3.6 Network/Ethernet Interface – Setting up WLANs in Bridge Mode
A WLAN is the combined entity of VAPs and VLANs. Each VLAN has a unique IP address, which you must
configure.
It is possible to create several networks that work in parallel on the same WBSn-2450. This can be done
by creating several VAPs mapped to several VLANs. Each VAP will represent a different broadcast domain
on the wireless interface, isolated from other VAPs by using different broadcast keys, with the broadcast
domains on the Ethernet interface separated by the VLAN.
3.6.1
Configuring Ethernet Interface
3.6.2
Configuring Network IP Configuration
To Configure the Default IP
1.
Navigate to Configuration => Network => IP Configuration to specify the default IP for your
VLAN.
2.
Click Add (or to specify an existing IP configuration, click Edit). The following dialog is displayed: