Wavion WBSn-2450, User Manual

Page: 22 / 41

WBSn-2450 User Guide Page - 22 -
Parameter Description
WMM Classification Packet prioritization over Wi-Fi is based on four access categories defined by
the WMM standard:
• Voice traffic
• Video traffic
•
Best effort traffic
• Background traffic
A packet sent to the Ethernet interface of the base station is classified as one of
the Access categories. This classification is performed based on DSCP or
W8021p priorities. For information about classification configuration, please see
QoS Packet Priority .
Dynamic-VLAN Automatic VLAN assignment
Values:
•
Enabled
•
Disabled
QinQ Enables VLAN QinQ encapsulation.
•
Enabled
•
Disabled
Note: Can only be enabled when Dynamic-VLAN is enabled.
ACL Group The ACL (Access Control List) controls who can access the VAP.
A list is created according to specific parameters, and given a unique name, and
will either define an Accept group (those users permitted VAP access), or a
Reject group (those users denied VAP access). For more information, see
MAC
Address List .
Security Mode Choose between the following:
• None (Open)
• WEP (Shared key)
•
WPA (PSK and RADIUS)
•
WPA2 (PSK and RADIUS)
For more information about authentication and encryption, please see the
Security, Authentication and Encryption Modes table .
Limit number of
stations
Controls the number of clients associated to the base station.
•
If Enable Limit is selected, a numerical limit can be specified.
• If Enable Limit is not selected, any number of clients can associate to the
base station.
There is no default limitation on the number of associations supported.
WBSn supports up to 256 associated clients per radio, utilizing the Open
security mode.
Note: For WBSn-2450 v 1.0, up to 127associated clients per radio are
supported.
In other security modes the maximum number of associated clients is different.
For more information, please refer to the Security, Authentication and
Encryption Modes table .