background image

Operating instructions DUO 315  

14 Conditions of Warranty 

 

(05.11)  

KS_DUO 315_BA_04_701474600_00.doc

 

 

11

 

14 Conditions of Warranty 

This warranty covers only those defects to the product which arise from 
normal use of the product, and will become invalid if any of the following 
apply: 

  Failure to follow the operating instructions 

  Improper or inadequate maintenance 

 Unauthorised 

modification 

  Misuse or any use not in accordance with the operating manual or 

good industry practice 

  Physical abuse of the product 

  Operation outside the products specifications 

  Improper site preparation or site maintenance 

  Faulty pipe or fitting 

 

15  Extent of Warranty 

Subject to the conditions and limitations of warranty; Advance Welding 
warrants that its electrical products will be free from defects in materials 
and workmanship for a period of twelve months, and its mechanical 
products for six months, from the date of purchase by the end-user 
customer. 

If during this period, notice of a defect which is covered by this warranty 
is received, then Advance Welding will either repair or replace the 
product at its option. Any replacement product will have functionality at 
least equal to that of the product being replaced, and will in our opinion, 
perform consistently with its age and usage. 

Unless otherwise agreed, all warranty work will be carried out by 
Advance Welding or an authorised and approved service facility. 

Customers will prepay all shipping charges for products returned under 
warranty, and Advance Welding will charge for return of the products 
back to the customer. 

This warranty statement gives the customer specific legal rights. The 
customer may also have other rights which vary from country to country 
in the world. 

 

Summary of Contents for DUO 315























































Reviews: