[13]
FUNCTIONS
This section will cover the main functions of the Paging Encoder Setup V9 Software (
fig. 9
).
Figure 9: Main Functions
1. PAGER FAMILIES
PAGER FAMILIES
(
fig. 10
) displays the current database’s list of valid pager IDs, capcodes, and
messaging formats used for transmitting pages, and
each row in the window is a separate Pager Family
entry
. Each encoder can have up to 50 different Pager Family entries in a single database configuration.
Figure 10: Pager Family Row
1.
ACTIVE
– Controls if a Pager Family is checked when paging data is received from a Host Device.
2.
PAGER QTY
– Sets the range of ID and capcode pairings. It can be set from
1-999
.
3.
START ID
– Sets the first ID used in order to calculate the range. Valid IDs range from
1-9999
.
4.
END ID
– An unmodifiable display of the last calculated ID in the range.
5.
START CAPCODE
– Sets the first capcode used in order to calculate the range.
6.
END CAPCODE
– An unmodifiable display of the last calculated capcode in the range.
