Wavetronix SmartSensor HD, User Manual

Page: 92 / 109

Chapter 8: Setting Up and Downloading Sensor Data
•
91
Understanding data storage tools
Setting Description Details
On/off switch Turns interval data
storage on or off.
Turn this on for normal
data collection.
Stop when FULL Sets the sensor to
stop storing data
once the storage
capacity is reached,
meaning all new data
after that point won’t
be saved to memory.
Use this if you don’t
want old data to be
overwritten by new
data, should the
sensor’s memory fill
up.
Oldest Shows the timestamp
of when the earliest
interval data packet
currently saved to the
sensor was stored.
Use this to see what
timeframe your data
storage covers.
Newest Shows the timestamp
of when the most
recent interval data
packet was stored.
Use this to see what
timeframe your data
storage covers.
Total Shows the amount
of time that data can
be stored, based on
the current lane and
interval configuration.
Use this to know how
much storage space
is used on the sensor.
Remaining Shows how long until
the sensor’s storage
reaches capacity.
Use this to know
how much storage
space remains on the
sensor.
Status bar and
percentage
Shows how full the
sensor’s storage
is and how much
storage capacity
remains.
Use this to know
how much storage
space remains on the
sensor.
Eraser Erases all the interval
data currently saved
to the sensor.
This data can’t be
recovered, so don’t
click this until you’ve
downloaded the data
to your computer, if
needed.