Wavetek TPP1-C, User Manual, Page: 2 / 22

1
TPP Mini-Thermometers
Safety Information
•
Do not use the thermometer if:
•
It appears to be damaged.
•
It does not carry out the desired measurement.
•
When replacing the battery, make certain of the correct polarity.
•
Only use batteries as described in the Specifications section.
•
Use the thermometer only as specified in this manual, or the protection
provided by the thermometer might be impaired.
•
Thermometers must be stored in a dry and closed area. If a thermometer
is transported in extreme temperatures, a 2 hour recovery time is
required before use.
XW
Warning
Shock danger. Supplied thermometer is not intended for contact
with live electrical circuits.
Symbols Used in this Manual
X
Dangerous Voltage
W
Refer to the manual
Introduction
The Wavetek Meterman models TPP1 and TPP2 are mini-thermometers with
a Negative Temperature Coefficient (NTC) sensor allowing for simple and
quick temperature measurement. Both models are available in Fahrenheit and
Celcius versions.
Model TPP1
Immersion thermometer for measuring the temperature in air, liquid, or
powdery materials.
Model TPP2
Thermometer with flat surface probe.
The manual contains information to allow you to safely operate and maintain
the TPP series of digital mini-thermometers. Please read the manual before
using the mini-thermometer.
XW
Warning
Before making a measurement, verify that the surface to be
measured is not electrically live. Failure to comply can lead to
operator injury or instrument damage.
W
Caution
Follow the specified thermometer measurement ranges.
W
Caution
To avoid burns, only touch the unit under test using the
measurement probe.