Wavetec Spectra, Installation Manual

Page: 10 / 17

10
Description:

Connect the Spectra controller as shown in wiring diagram above.

When using TCP Active Hub, Spectra can be configured to transfer data for displays (CDUs,
SDUs and PDUs) and HTSUs over TCP/IP connection to TCP Active Hub.

TCP Active Hub must be connected to same local network as Spectra is connected to.

It is recommended to use this mode if using TCP Active Hub (for setting up TCP Active Hub
refer “TCP Active Hub installation guide”)
Note:

It is recommended to use Cat5e or Cat6 LAN cable/Patch cord.

When operating in TCP/IP mode we won’t be using CDU port.