Disassemble the camera
Installa
�on -
Before installing your camera, you have to read the following cau�ons.
2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
1. You have to check whether the loca�on can bear five �mes of the weight of your camera.
3. When installing your camera, don’t allow any person to approach the installa�on site. If you have any
valuable things under the place, move them away.
it may cause a breakdown or fire.
Detach the dome cover by torx wrench provided from
bo�om case before installa�on the camera.
Match the one screw hole on the dome cover and
camera bo�om specially.
1
Reset to the Factory Default
Press the reset bu
�
on for 5 seconds to return the setup
to the factory default.
Warning:
If you press the ‘Reset’ bu�on, you will lose all se�ng
data. If needed, please, make a note for further installa
�
on.
The camera has a manual IR switch, located under
the camera’s lens. You can use this switch to
manually turn the IR LED board on or off according to
the installa�on needs.
2
LED ON/OFF
Reset Bu�on
8
