Installa
�on and Use P
rec
au�ons
1. The ba
�
ery (ba
�
ery pack or equipped ba
�
ery) must not be exposed to excessive heat such as sunligh
t, fi
re, etc.
2. Do not disassemble the camera at your discre
�on.
3. If you forcefully install the product with excessive for
ce, malfunc�on
can damage the camera.
4. Do not punch or shake the camera and be careful not to damage the camera with careless storage or malfunc
�o
n.
5. Be careful not to install the camera in a rainy or humid place, and do not leave it in a wet place.
6. Installing or using the product in water can cause serious product failure.
7. Do not install the product if there is chemical or vapor in the place where the product is installed, or if it can be generated.
8. Be careful not to get chemicals on the surface of the product when installing the product. Chemical solvents such as cleaning
agents and adhesive components can cause fatal damage to the surface of the product.
9. Do not install it near the kitchen or cooking table as edible oil such as soybean oil can also cause product damage and
deforma
�on. It
can cause product damage.
10. Be careful not to get foreign substances on the Micro SD card terminal. If there is any foreign subst
ance, wipe it with a so�
cloth.
11. Data will not be saved at the end of the life of the Micro SD card. In this case, purchase a new Micro SD card.
12. Moisture may occur in the glass of the camera when the new product box is opened (or when the pr
oduct is ini�ally running).
The generated moisture is removed by a Gore vent a
�
ached to the camera within hours of the power c
onnec�on.
13. For products enclosed with a desiccant or card-type absorbent, please install it according to the manual.
14.
Use only with cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus.
15.
Unplug this apparatus when a cart is used. Use cau�on when moving the cart/apparatus
combina�on to avoid injury from �p-over.
4
