1
Network Connection
Connect the Straight through or crossover cable.
Benting the cable can cause water leakage.
Lan Cable thickness ø5.0 ~ ø8.0mm.
2
I/O Cable Connection
3
Power
Please check the correct rated power.
4
Sensor/Alarm Input (DI)
Cable of the sensor/alarm input device should connect to +
and - of the Terminal Block.
Alarm Out / Relay Out (DO)
It connects to the alarm lights, siren or lamps and the
sensor types are normal open and normal close.
5
MIC
Built-in microphone.
6
Audio Out
Connect the ‘Audio Out’ port of the camera to the ‘Line In’
port of the speaker.
If the speaker without the amplifier is connected to
Audio Out port, it doesn’t work properly. Therefore, the
speaker with the amplifier or the separate amplifier is
needed.
Audio Out supports only RTSP Back channel function.
It plans to make it available on the web later.
7
SD Card Slot
14
Installation -
Cabling
Rate Power
Power
Consumption
PoE
DC 12V
9W
IEEE 802.3af class3
+
-
+
-
+
-
COM OUT
DC12V
DI
DO
AUDIO
3
4
6
1
2
7
5
