WIFI-LPT100-B User Manual
43
/
60
➢
Format:
AT+ TCPLK<CR>
+ok=<sta><CR>< LF ><CR>< LF >
➢
Parameters:
sta: SOCKA connection status;
on: TCP connected;
off: TCP disconnected;
16) AT+TCPDIS
➢
Function:
Open/Close SOCKA TCP link;
➢
Format:
Query Operation:
AT+TCPDIS<CR>
+ok=<sta><CR>< LF ><CR>< LF >
Set Operation:
AT+ TCPDIS =<on/off><CR>
+ok<CR>< LF ><CR>< LF >
➢
Parameters:
On: TCP link close
Off: TCP link on
When query Operation, sta: Feedback if SOCKA TCP Client is link.
When Set Operation, “off” means close TCP link. After finish this command, module
disconnect TCP link and not connect again. “On” means open TCP link. After finish this
command, module re-connect TCP server right away.
17) AT+SOCKB
➢
Function:
Set/Query SOCKB network protocol parameters. Setting is valid after reset.
➢
Format:
Query Operation:
AT+SOCKB<CR>
+ok=<protocol, port, IP><CR>< LF ><CR>< LF >
Set Operation:
AT+SOCKB=<protocol, port, IP><CR>
+ok<CR>< LF ><CR>< LF >
➢
Parameters:
Protocol: TCP, UDP, UDPS