WIFI-LPT100-B User Manual
28
/
60
4.9 Firmware and WEB upgrade
WIFI-LPT100/WIFI-LPB100 supports upgrade firmware and web over wireless. WIFI-
LPT100/WIFI-LPB100 upgrade method can refer to Section 5.1.9 firmware upgrade page.
Besides, you can login http://10.10.100.254/iweb.html to update firmware and web.
Diagram is as follows:
Note:
Before any firmware upgrade, be sure to contact WS, or else it may result in
permanent damage to the module.
5 Module Parameter Configuration
WIFI-LPT100-B modules support two methods of Parameter configuration: web and
AT command, the following will describe the detail of two methods.
5.1 WEB
5.1.1 Web Brief Description
When first use WIFI-LPT100-B modules, user may need some configuration. User can
connect to WIFI-LPT100-B
module’s wireless interface with following default setting
information and configure the module through laptop.
Parameters
Default Setting
SSID
WIFI-LPT100
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
admin
Password
admin
5.1.2 Open Web Management Interface
Step 1: Connect laptop to SSID WIFI-LPT100/WIFI-LPB100 of module via wireless LAN
card;
Step 2: After wireless connection OK. Open Wen browser and access
“http://10.10.100.254”;
Step 3 Then input user name and password in the page as following and click
Figure 20 Upgrade Page