27.
The machine should not be operated by means of an external timer-switch or by means of a
separate system with remote control.
28.
Do not remove the lid while the water is boiling.
29.
If you wish to stop the kettle before the water has boiled, you must switch off the appliance.
30.
This appliance is intended to be used in household and similar applications such as: staff kitchen
areas in shops, offices and other working environments; farm houses; by clients in hotels, motels
and other residential type environments; bed and breakfast type environments.
31.
This appliance is not designed for commercial use.
32.
Our warranty does not cover water kettles that malfunction resulting from failure to descale.
33.
The kettle is only to be used with the stand provided.
34.
Don’t boil any tea directly in this water kettle.
HOUSEHOLD USE ONLY
PARTS DESCRIPTION
1.
Lid release lock
2.
Handle
3.
Water Gauge
4.
On/Off Switch and adjustable temperature control
5.
Power Base
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you clean your kettle before use
by boiling a full kettle of water twice and then discarding the water.
OPERATION OF YOUR KETTLE
1.
Open the lid; fill with the desired amount of water to the water kettle. Always fill the kettle
between the minimum (0.5L) and maximum (1.7L) marks. Too little water will result in the kettle
switching off before the water has boiled.
NOTE:
Do not fill the water over the maximum level, as water may spill out of the spout when
boiling. Ensure that the lid is firmly in place before connecting the power cord to the outlet.
2.
Connect the plug into a power outlet. Press the On/Off Switch button on the handle and the
kettle starts to boil the water. The LED light will be shining in red. The kettle will switch off
automatically once the water has boiled. You can shut off the power by pressing the switch
button again at any moment during boiling water.
NOTE:
Ensure that switch is clear off obstructions and the lid is firmly closed. The kettle will not
turn off if the switch is constrained.
3.
Take the plug out of the outlet. Lift the kettle then pour the water.
NOTE:
operate carefully when pouring the water from your kettle as boiling water will scald.
4.
The kettle will not re-boil until the switch is pressed again. Allow to cool for 30~40 seconds
before reopening to boil water.
NOTE:
Ensure power supply is turned off when kettle is not in use.
5.
Should you accidentally allow the kettle to operate without water; the boil-dry protection will
automatically switch it off. If this occurs, allow the kettle to cool before filling with cold water
