Waves GTR Ground – User Manual
7
Activated stomps will glow brightly and show three dots
between the stomp name digits. Bypassed stomps will appear
dimmed, with no dots between the digits. Clicking the button
under the display will toggle the status of the stomp effect
currently assigned to that slot.
For example, if the “Gate_Comp” stomp is assigned to button
A and active, the display shows
“G._.C”
in glowing orange
LED lights. Clicking the button under the display will bypass
the stomp and show
“G _ C”
dimmed, without dots.
To change presets in individual stomp mode scroll through the
presets using the Up and Down buttons.
Preset Select Mode
The Preset button is the third button from the left in the top
row, above the preset # display. It lets you toggle through
GTR Ground's Preset Select Mode.
In this mode, the bottom displays will show 6 preset
numbers. Pressing the corresponding A – F button will load
the preset number shown above it. Instead of activating or
bypassing a single stomp, Preset Selection Mode allows you to
dial up a complete preset from the current preset file. It also
lets you can also move up or down in steps of 6 presets
using
the up down buttons in the top row
.
Tap Tempo / Tuner
In both Individual Stomp Mode and Preset Select Mode, use
the Tap Tempo / Tuner button (fourth button from the left)
to set your tempo by tapping on it several times in
succession. A longer press on the button will call up the GTR
Tuner.
