Waves GTR Ground – User Manual
6
display information from the plug-in to GTR Ground
requires a MIDI path from the plug-in to a MIDI
output. Since most host applications do not allow this
functionality, GTR Ground does not display updated
plug-in information.
3.
Using GTR Ground to control another MIDI
enabled software application or device.
Controlling Waves GTR Standalone
This section describes the direct control of the GTR
Standalone application by the GTR Ground. For information on
controlling the GTR plug-in through a host application, see the
next chapter of this manual.
After connecting GTR Ground as described in the previous
chapter, launch the GTR
Standalone application
.
Once GTR
Standalone
is launched, it will detect the GTR
Ground, and update the GTR Ground displays to show the
current status. In the top row preset display, GTR Ground will
show the current preset number. This will be either the last
preset that was launched and saved in GTR
Standalone
, or
the GTR Factory Default Preset 000.
Individual Stomp Mode
GTR Ground defaults to Individual Stomp Mode. In this mode,
you can use the foot controls to activate or bypass individual
stomp effects.
The bottom row displays along will show short names for the
stomp effects in each of GTR Standalone’s stomp slots, and
whether they are active or bypassed.
