DiGiGrid IOS/IOS-XL / User Guide
14
T
OP
B
AR
The Top Bar of the Controls page includes an illustration of the IOS/IOS-XL rear panel. When an input or output is
selected in the main section of the page, the corresponding connector is highlighted.
A
NALOG
S
ECTION
There are eight mic preamps and line inputs and eight line outputs. Each preamp channel is represented by a button that
turns the channel on or off. Each channel has a meter and a clip indicator. Select a channel and it will appear in the
Focus
section, where preamp parameters are controlled.
Use the
Focus section on the left side to adjust preamp levels and turn the
48V phantom on and off. The long meters range from -80 dBFS to 0 dBFS.
Mic/Line knob gain range: 0 dB to +52.5 dB in 7.5 dB steps
Line knob gain range: 0 dB to +52.5 dB in 7.5-dB steps
Fine knob digital gain range: 0 dB to +7 dB in 0.5 dB steps
A clip indicator holds for two seconds or for as long as clipping persists.
Peak hold stays lit until you reset it by clicking on the indicator.
An orange light on a channel button indicates that phantom power for that
channel is active. This status is also shown in the Focus section.
