Waves CA3000-MX / User Guide
9
Routing Dante Channels to CA3000-MX Mixer Channels
Now you’re ready to route the Dante channels in LV1. Dante channels can be selected as input sources or output
destinations for each channel. Channel input and output routing is done in the LV1 Channel view or Patch view. In the
following example, we will route rack input from a Dante channel to a single channel in the Channel view. Use the tab at
the top to open the Channel view.
LV1
C
HANNEL
A
SSIGNMENT USING
C
HANNEL
V
IEW
Select a channel.
Click on the Input arrow at right side. This opens the
Input Device Assignment menu.
Select an input source.
Select an input audio channel. Note that channels
are displayed in the “Dante Virtual Soundcard.”
Channel and bus outputs are routed in a similar
manner.
Confirm the routing in the Dante Controller for the
network audio devices that will be connected to and
from the CA3000-MX.
