P600 Lift
- User Guide
Rev: 31MAY2011
Page: 5
Specifications of P-600 lift
The following components are included with your new
P-600
lift system:
x
P-600
lift
•
Pneumatic Hand Control
•
Lift Charger
•
Owner’s Manual
•
Warranty Card
SLINGS:
If a sling has been supplied with the lift refer to the instructions included with the sling.
ACCESSORIES:
If additional accessories such as a turntable, or gate system, have been supplied with the
lift refer to the instructions included with those items.
IMPORTANT:
Before initial use, the lift unit must be charged for 5 hours. Refer to section titled
"
Charging Instructions
". The hand control airline tube must also be connected to the lift. If it is not
connected refer to the section titled “
Attaching the airline to the lift
”.
Component List
Lift Motor:
24 VDC
Charger Input:
100-240 VAC, 0.35 Amps
Charger Output:
29.5 VDC, 1.3 Amps
Batteries:
24 VDC (2 x 12 VDC) 5.0 AH
Lift Case:
Flame Retardant ABS
Hand Control:
Pneumatic – Piston Displacement
Lifting Range:
Up to 1.96m
Lift Weight:
23 lbs (10.432 kg)
Maximum Load:
600 lbs (274.28 kg)
Internal Fuses:
15 Amp
Duty Cycle:
1 min “ON”, 9 mins “OFF”
Rated Performance:
5-10 lifts at 600 lbs, 10% duty cycle, each lift being 24 inches at the
middle of the lifting range (from 54” strap out to 30” strap out) per full battery
Models Table for
P-600
Lifts
Code
Description
303090
P-600
lift including charger and pneumatic
hand control
Shipping/Storage Conditions
:
Temperature: Shipping/Storage:
-40 to +70 ºC
Relative Humidity: Shipping/Storgage: 10 to 100% RH
Atmospheric Pressure: Shipping/Storage: 500 to 1060 hPa
