English
Infrared (IR) remote control
TWO
NEO
/
PRO
offers infrared remote control function. Beside the multifunktion knob's features,
there are a lot more functions to be controlled by the infrared remote control.
Batteries:
Before operation of the IR remote control, the batteries need to be installed.
The battery compartment can be opened by pushing the clip hook's handle in direction to the
battery cover and pulling out the battery cover.
Insert the batteries (2 x AAA batteries) with their polarity according to the markings in the battery
compartment. Wrong polarity can cause a defect! With wrong polarity of the batteries, there can
be no function of the remote control!
To close the battery cover, first insert the hook below it and clip-in the clip hook until you can see
the cover is flush with the cabinet bottom side.
If you plan not to use the IR remote control for a longer time, it will be recommended to remove
the batteries to avoid any damage by aged batteries.
IR remote control functions:
•
ON/STANDBY
(1) if the device is off, short push this button to power ON and manually force
OFF.
Please note: if you manually force the device OFF the automatic power-ON will be
deactivated, so the device cannot power-ON automatically by audio signals!
To utilize the automatic ON and STANDBY function, there is no need to power-OFF your
TWO
NEO
/
PRO
manually but simply keep it ON. The automatic STANDBY function will power-
down (STANDBY) for you. Prerequisite is the switch AUTO-ON/STANDBY on the speaker's
backside is set to ON.
•
TONE DEFEAT
(2) With this button the sound effect set by tone controls BASS and
TREBLE can be deactivated and activated again, without losing the settings.
19
Summary of Contents for TWO NEO
Page 1: ...WIRELESS 2 0 SOUND SYSTEM Bedienungsanleitung 3 User Manual 13 Mode d emploi 23...
Page 2: ...2...
Page 12: ...12...
Page 22: ...22...
