manualshive.com logo in svg

Wavecrest TidalForce M-750, Owner'S Manual, Page: 26 / 43

Share
Download
Wavecrest TidalForce M-750 Owner'S Manual Download Page 26

Operation WaveCrest 

Laboratories 

TidalForce M-750 High Performance Electric Bicycle Owner’s Manual 

26 

 
 

 

Figure 12.  Dashboard Faceplate 

Battery Buttons 
The “BATTERY A” and “BATTERY B” buttons turn on and turn off battery power for the front 
hub battery and the optional second battery, respectively.  To turn on the front hub battery, 

momentarily press and release the “BATTERY A” button. There will be a momentary delay 
(about half second) and the system will become active.  The LEDs in the “BATTERY A” LED 
display should become lit according to the schedule defined in Table 1, indicating that the 

front hub battery power is turned on.  To turn off the front hub battery, press and hold the 
“BATTERY A” button for at least two seconds.  All LEDs in the “BATTERY A” LED display will 

become unlit, indicating that front hub power  is  turned  off.    The  “BATTERY  B”  button 
controls the optional second battery in a similar manner (if installed). 

 NOTE: Only one battery may be turned on at one time; the system prevents 

both batteries from being turned on at the same time. 

The functions of the battery buttons are defeated (disabled) if the anti-tamper key is 

installed and set to the “OFF” position.  Battery power automatically turns off if the M-750 
has remained idle (not moved) for five minutes. 
 
 
 
 
 

Summary of Contents for TidalForce M-750












































Reviews:

No comments