Wavecom Instruments Insulation-Continuity Tester User Manual
Page 19
11. Battery & Fuse Replacement
11.1 Battery Replacement
Your analogue insulation tester's battery compartment is situated
under the tester. The BAT.OK will not illuminate when batteries need to
be replaced. Disconnect the test leads from the Instrument, remove
the battery cover and the batteries.
Replace with eight 1.5V R6 or L6 batteries, taking care to observe the
correct polarity.
Replace batteries and the battery cover.
11.2 Fuse replacement
The fuse is located next to the batteries. To replace fuse, proceed as
per battery replacement to open the battery cover, then remove and
replace the fuse located under the battery holder. Only replace with
same specification fuse.(0.5A/500V)
12. Calibration & Servicing
Contact your nearest distributor about calibration certificate and servicing.
Before returning the instrument, ensure that
：
● the leads have been checked for continuity and signs of damage.
● the batteries are in good condition.
