iGPS-M USER’S MANUAL
7
Familiarize your iGPS-M
Dimensions
Length
：
64 mm Width
：
57 mm Height
：
16.5 mm Weight
：
85+/-5 gram
Interface
As shown in the illustration on the right, the length of the wire on iGPS-M receiver
is 2 meters. There is a 6 -pin connector for the connection to PC/Lap top or handheld
device. The ping assignment is shown below.
A. SP6-Pin Female Connector
B. PSII Female Connector
Water-proof housing with magnet on the bottom
There are 4 magnets on the bottom side of iGPS-M receiver for adsorbing on your
car. The housing of iGPS-M receiver has waterproof, it can avoid the water permeates
your iGPS-M receiver while you adsorb it outside of the car.
LED Light
There is an LED light near the output cable on the back of iGPS-M receiver. When
the iGPS-M supplied 5V DC power, the LED will be flashing. It means iGPS-M receiver
starts to provide the positioning function.
Ping No.
Function
1
Rx TTL
2
Tx TTL
3
DC 5V
4
RS232 Rx
5
GND
6
RS232 Tx
6-pin female connector
2 meters long wire
Ping No.
Signal
1
Tx (RS-232)
2
+5VDC
3
Tx (TTL)
4
Ground
5
Rx (TTL)
6
Rx (RS-232)
Summary of Contents for iGPS-M
Page 1: ...iGPS M USER S MANUAL 1...
