Removing the bungee/shock cord:
1
Lay the rower on its side to allow better access to bottom of rower frame
2. With scissors, cut the tie wrap holding the bungee in place.
CAUTION
The bungee is under slight tension, hold one end while cutting
2
Pull the bungee through the two frame pulleys and out the top of the belt/bungee pulley as shown.
Replacing the bungee/shock cord:
1. Feed bungee cord through top of belt/
2. Bungee cord is then fed through upper 3. Use tie provided or simply knot end of
bungee pulley.
and lower bungee pulleys.
bungee cord. Note: The amount of
bungee tension is easily adjustable.
Summary of Contents for WR-P
Page 11: ......
Page 16: ...Parts illustration...
