9
Wave Central LLC HEVC ENC and DEC May 2019
Using the Right button will toggle to the next position. Up or down buttons
are used to set numbers. Once completed, press the ENT button.
Press the down button and VIDEO MODE is displayed: HEVC (High
Efficiency Video Coding). Press the down button again and VIDEO DELAY
MODE is displayed: LOW DELAY. Press the down button again and VIDEO
CHROMA FORMAT is displayed: 4:2:0. Press the down button and VIDEO
BIT DEPTH is displayed: 10-bit.
Press the ENT button and the next system menu will appear. Push the
down button and select the CONFIG AUDIO menu. Press the ENT button;
confirm the AUDIO SOURCE 1 EMBEDDED 1 (1/2) is displayed. Continue to
scroll down until the AUDIO MODE PAIR 1 MPEG2 LAYER 1 is displayed.
Continuing to scroll will display the remaining audio menus. All menus are
located at end of this manual.
Press the ESC button and return the CONFIG AUD system menu. The next
menu is CONFIG PIDs; these are set and should not have to be changed.
The next system menu is CONFIG IP. This is used to set the ENC and
decoder parameters via a web browser. Scroll down to UNIT menu by
pressing the down button. Press the ENT button. The HEVC VERSION
software is displayed, scroll down to the following menus: HEVC FPGA
TEMP, HEVC PSU TEMP, HEVC VOLTAGE, HEV SERIAL Number and WC
(Display screen) VERSION. Pressing the ESC button several times will
return to the home screen.
