3
Wave Central LLC HEVC ENC and DEC May 2019
AXENC Rear Panel View
Introduction to the AXENC
There are two modes of operation. Mode 1
Mode 1
Mode 1
Mode 1: 4K Ultra HD Mode. Input video
format is 4K Ultra HD. Format must be the same as the camera provided
format. Mode 2
Mode 2
Mode 2
Mode 2: HD Mode. Input video is HD video, this can be up to four
separate HD video streams. An optional software key is required.
Getting Started
Typical video format used must match the video source e.g. 2160p50 or
2160p59. P
P
P
P Progressive mode must be used for 4K UHD (Ultra HD) mode.
The Video Sample Format must match the video source e.g. SQD (Square
Division) quad pictures or 2SI
2SI
2SI
2SI (two sample Interleave).
The Camera format for this procedure as described in this operator’s
manual is set to 2160p 59.94 and 2SI
2SI
2SI
2SI
Once the source format is determined the AXENC is powered from the
external 12 VDC power supply provided. No external connections are
required during the initial startup. Turn the power switch on to begin the
initialization boot up procedure.
