WATTWHEELS LTD
7
To activate the walk mode, hold down the + key for three seconds. This will propel the trike forward at around 6km/r. This can be used if you need to
walk the trike up a hill and need some assistance in doing so.
TRIP 1
- Can be reset by going into the SET 1 option as discussed in the special functions below. This will automatically accumulate but will reset
after it gets to 500km.
TRIP 2 -
Displays the last biking distance for 30 seconds when the trike is restarted. It resets every time to record each ride.
TIME
- Displays the total time ridden on each ride. Note - this resets every time the display is turned on/off
ODO
- Displays total distance ridden on the trike. This cannot be reset and keeps accumulating.
SPECIAL FUNCTIONS
Hold down the set key for 3 seconds to get to the special menu. Here there are four functions that can be changed.
SET 1
- Trip 1 distance reset. Press the
–
key to reset.
SET 2
–
Wheel Size. Please make sure the wheel size is on the correct level otherwise the trikes information it records may be incorrect.
20 Wheel should be set at 1590
SET 3
–
Km/h or Mph. Here you can select either options. Default is KM/h
SET 4
–
Speed limit. Here you can restrict the speed if needed. Default is 40km/h although the trike will assist over this in some cases. If you need to
limit the speed, then press the - key and you can set at 32km/h or lower if required.
SET 5
- Current which impacts on power. Default is the highest at 18ah.
Please contact your local retailer if you need any assistance on this. Alternatively, you can check Wattwheels website for up-to-date instructional
videos.
