background image

The Auditor device has a warning symbol (see on the left) on the side of the Auditor
device which indicates that the device may cause electric shock to a person if the
device is opened, which can result in personal injury or even death. The warranty will
also be voided if the device is opened or otherwise tampered with, without written
authority from Wattwatchers.

To prevent safety risks,, including the potential for injury or death, please use the test
and short-circuit blocks with the billing current transformers (CTs) that are supplied
for the CET PMC meters.

Never connect a billing CT—which has a 5A output—to the Auditor device. Billing CTs
are only designed for connecting to the CET PMC meters.

WARNING: 

Billing CTs have a potential of 

5 AMPS on the secondary side

 when

connected. If exposed to the open terminal when the CT is operational, there is a risk
of serious injury or death.

The Auditor device must be installed by a licensed electrician, or an individual with
equivalent qualifications as required by the laws of the relevant state or country. The
installer must possess comprehensive knowledge of applicable standards and
directives within the jurisdiction where the device is being installed.

The warranty will be voided if the device is installed by someone who does not meet
the minimum licensing requirements for electrical device installation. The installer
must adhere to this safety guide, as well as the rules, regulations, and laws of the
state/country where the device is being installed. Failure to comply with the safety
guide will also void the warranty. Please read the full safety manual in the link above.

YOU MUST READ THE FULL SAFETY MANUAL BEFORE INSTALLATION

!

You must read the full safety manual given to you before installing the 6M+One.

The safety manual contains information and advice on how to avoid damaging the

Auditor device, and how to avoid personal injury or death. You will find a copy of the

safety manual in the link below or by scanning the QR code.

 

https://service.wattwatchers.com.au/safety-manual

Scan QR code to view the complete safety
manual or go to:

FIND THE SAFTEY MANUAL HERE

SAFETY GUIDE

© 2023 Wattwatchers Pty Ltd ABN 47 123 010 588                       v2.0     Page 3/14 

Summary of Contents for A6M+One















Reviews: