wattstopper CI-300 Installation Instructions Manual Download Page 14

Catalog # 

Description

  CI-300 

PIR Occupancy Sensor, low voltage, 360° lens, up to 1200 square ft., 

isolated relay & light level sensor

  CI-300-1 

PIR Occupancy Sensor, low voltage, 360° high density/reduced 

range lens, up to 500 square ft., isolated relay & light level sensor

  CI-305 

Passive Infrared Occupancy Sensor, low voltage, 360° lens, up to 

1200 square ft.

  CI-305-1 

Passive Infrared Occupancy Sensor, Low Voltage, 360° high density/

reduced range lens, up to 500 square ft.

  BZ-50 

Power Pack: 120/277VAC, 50/60Hz, 225mA,  20A ballast or 

incandescent, 1HP@120/250VAC

  BZ-150 

Power Pack: 120/277VAC, 50/60Hz, 225mA,  20A ballast or 

incandescent, 1HP@120/250VAC

  S120/277/347E-P  Auxiliary Relay Pack: 120/277VAC, 60Hz, 20A Ballast, 347VAC, 

60Hz, 15A Ballast

WARRANTY INFORMATION

WattStopper warranties its products to be free of defects in materials and 

workmanship for a period of five (5) years. There are no obligations or liabilities on 

the part of  WattStopper for consequential damages arising out of or in connection 

with the use or performance of this product or other indirect damages with 

respect to loss of property, revenue, or profit, or cost of removal, installation or 

reinstallation.

All sensors are white. 

B series power packs supply power for up to 6 CI-300 sensors. 

BZ series power packs supply power for up to 8 CI-300 sensors.

2800 De La Cruz Boulevard, Santa Clara, CA 95050 

 800.879.8585 

www.wattstopper.com 

03488r3 04/2012

ORDERING INFORMATION

Please 

Recycle

Summary of Contents for CI-300















Reviews: