Wattsonic AIO ESS | USER MANUAL
56
Auto-Test
Monitoring and Configuration
This function is disabled by default, and only will be functional in the safety code of
Italy. Short press the button several times until “Auto Test CEI 0-21” displays on the
screen, press and hold the button 3 seconds to activate “Auto Test”. After the auto
test finished, short press the button several times until the screen displays “Auto Test
Record”, and hold the button 3 seconds to check the test result.
The auto test type will be chosen from “Remote” and “Local” before starting the auto
test. “Remote” is set as 1 by default, which only can be modified to “0” by sending
an external command and “Local” is set as 0 by default, which can be modified to 1
through operating the button on the inverter. According to the requirements of the
standard, the test has been divided into three modes:
1) “Remote” set as 1, “Local” set as 0, then the test order is 59.S1, 59.S2, 27.S1, 81>.
S2, 81<.S2;
2) “Remote” set as 1, “Local” set as 1, then the test order is 59.S1, 59.S2, 27.S1, 81>.
S1, 81<.S1;
3) “Remote” set as 0, “Local” set as 1, then the test order is 59.S1, 59.S2, 27.S1, 81>.
S2, 81<.S2.
Connect the AC cable, auto test will start after the inverter connected to the grid, see
the operation steps below:
Wattsonic inverter provides a monitoring port that can collect data from the inverter
and transmit it to monitoring website via an external monitoring data collector WiFi
or LAN module. Please check the WiFi user manual for more details.
The auto test will start when the correct test item is selected, and the test result
will be displayed on the screen when it finished. If the test success, it will display
“Test Pass”, otherwise will display “Test Fail”. After each item tested, the inverter
will reconnect to the grid and automatically start the next test item according to the
requirements of CEI 0-21.
Short press(1s),switch window
Long press(3s),enter the lower Menu
Remote Cmd
1
Select
Items
Wait
Wait
Wait
Wait
Wait
General
Settings
Auto Test
CEI 0-21
Main Windows
IPS Item
xxxxx
Test Record
If
Tested
Test Result
Display
Local Cmd
0
IPS Item
Test Null
Password
1111
Verify Ok
Password
1111
Setting
IPS Item
Test All
IPS Item
Testing
Test Pass/Fail
