Attach the finishing cover on the rear of the basket. Screw in screws from the interior of
the basket. Screw in a diagonal pattern and do not tightening completely until all 4
screws have been set into place. Tighten each screw diagonally to ensure a flush fit.
Do not over tighten as this may damage plastics.
Step Four: Mounting the Front Wheel.
To begin mounting the front wheel, first untwist the wire straps around the rear swing
arm. These cables hold the bike firmly to the packing carton.
Place the bike on it’s center stand to raise the bike higher in preparation for mounting
the front wheel.
6
