13
5.3 Control a dehumidifier per room.
There are 2 ways to detect humidity:
•
At controller level using the humidity detection input (See 5.5)
•
At the room level if the thermostat embeds a relative humidity sensor
When humidity is detected, there are 2 ways to trigger dehumidifier.
•
A global dehumidifier is triggered by the WFC HCM RF if the feature is activated on the WFC HCM RF
•
A dehumidifier is triggered on the room level where the humidity is detected
For that last case, you need to pair a receiver (such as a BT-WR02 RF or BT-FR02 RF) on each zone of the controller in order
to trigger a dehumidifier.
Device 1: WFHC 02 HC RF
Device 2: BT-WR02 RF or BT-FR02
RF
Remarks
By pressing
for 5 seconds, the
controller goes in RF pairing menu.
Bu using and
select zone 4
(Red led), press
to enter in
dehumidifier Pairing mode.
Choose the zones with and
(Zones are defined by paired
thermostat channels (for example if
TH1 = Z1, TH2 = Z2+Z3 and TH3 =
Z4+Z5+Z6, navigation proposes 3
zones to pair a dehumidifier on (Z1),
(Z2+Z3) and (Z4+Z5+Z6).
Select/deselect the zone with
.
Cursor is blinking green.
Selected zone is fix red.
Already paired zone is fix green.
Put the device in RF pairing mode.
Exit of the controller pairing menu:
Long press on .
WFHC 02 HC RF
BT-D03 RH RF
BT-D03 RH RF
BT-WR02 RF to trigger a dehumidifier
BT-WR02 RF to trigger a dehumidifier
Room 1
Room 2
Summary of Contents for WFHC 06Z 02 HC RF 24
Page 2: ...2 USER GUIDE GB...
