background image

3

BT-D03-MOI-FR-W-EN-06-19

English

English

En

En

GeneRal InfoRMaTIon  

Safety warnings and operating 
instructions

•  This product should be installed 

preferably by a qualified profes-
sional. Subject to observation of the 
above terms, the manufacturer shall 
assume the liability for the equip-
ment as provided by legal stipulations.

•  All instructions in this Installation & 

Operation manual should be observed 
when working with the thermostat. 
Failures due to improper installation, 
improper use or poor maintenance 
are voiding manufacturer liability. 

•  Any attempt to repair voids the respon-

sibility and the obligation to guarantee 
and replacement from the manufacturer. 

•  Do not cover the thermostat for accu-

rate measurement of ambient tem-
perature. Therefore the sensor must 
never be hidden behind thick cur-
tains, furniture, etc… Alternatively, 
a remote sensor should be used.

•  Batteries may explode or leak, and 

cause burn injury, if recharger, disposed  
of fire, mixed with a different battery 
type , inserted backwards or disas-
sembled. Replace all used batteries 
at the same time. Do not carry bat-
teries loose in your pocket or purse. 
Do not remove the battery label. Keep 
batteries away from children. If swal-
lowed, consult a physician at once.

•  2012/19/EU (WEEE directive): Products 

marked with this symbol cannot be dis-
posed of as unsorted municipal waste 
in the European Union. For proper recy-
cling, return this product  to your local 
supplier upon the purchase of equiva-
lent new equipment, or dispose of  it at 
designated collection points. For more 
information see: www.recyclethis.info

•  2006/66/EC (battery directive): This 

products contains a battery that cannot 
be disposed of as unsorted municipal 
waste in the European Union. See the 
product documentation for specific bat-
tery information. The battery is marked 
with this symbol, which may include let-
tering to indicate cadmium (Cd), lead (Pb), 
or mercury (Hg). For proper recycling, 
return the battery to your supplier or to 
a designated collection point. For more 
information see: www.recyclethis.info

application

•  The thermostat have been designed for 

use in residential rooms, office spac-
es and industrial facilities. Verify that 
the installation complies with exist-
ing regulations before operation to 
ensure proper use of the installation. 

Please refer to “Quick installation 
guide” for thermostat installation

Summary of Contents for Vision BT-D03 RF





















Reviews: