background image

14                                                                         PWF Filter Systems

settings in this display are ignored. Press SET HOUR to exit OEM system setup.

Installer Displays & Settings (1-99 Days Between Regeneration option)

STEP 1ID 

– From normal mode, press SET HOUR + UP buttons simultaneously for 3 seconds and 

release.

STEP 2ID

 – Backwash Time: Set the clock to the hour the regeneration should occur by using the UP or 

DOWN buttons. An arrow points to PM after 12. Press SET HOUR to go to STEP 3ID.

STEP 3ID

 – Days To Backwash: Set the number of days between backwash. The allowable range is 1 to 

99. Press SET HOUR to exit Installer Displays & Settings.

Installer Displays & Settings (7 day option)

STEP 1I7

 – From normal mode, press SET HOUR + UP buttons simultaneously for 3 seconds and 

release.

STEP 2I7

 – Regeneration Time: Set the clock to the hour the regeneration should occur by using the UP 

or DOWN buttons. An arrow points to PM after 12. Press SET HOUR to go to STEP 3I7.

STEP 3I7

 – Current Day of Week: Set the current day of the 

week by using the UP or DOWN buttons (See chart at right for 

date codes). Press SET HOUR to go to STEP 4I7.

STEP 4I7

 – Sunday backwash: To backwash on Sunday use the UP or DOWN button until the arrow 

points to Regen. If the arrow does not point to Regen a regeneration will not occur on Sunday. Press SET 

HOUR to go to STEP 5I7.

STEP 5I7

 – Monday Backwash: To regenerate on Monday use the UP or DOWN button until the arrow 

points to Regen. If the arrow does not point to Regen a regeneration will not occur on Monday. Press 

SET HOUR to go to STEP 6I7.

Display

Day of Week

d1

Sunday

d2

Monday

d3

Tuesday

d4

Wednesday

d5

Thursday

d6

Friday

d7

Saturday

STEP 1ID

STEP 2ID

STEP 3ID

Return to 

Normal Mode

SET 

HOUR

SET 

HOUR

Regen 

Min. Fill 

Regen

Hour

Time-Hour 

PM 

Days To Regen

SET 

HOUR

Regen 

Min. Fill 

Regen

Hour

Time-Hour 

PM 

Days To Regen

STEP 1I7

STEP 2I7

STEP 3I7

STEP 4I7

STEP 5I7

SET 

HOUR

SET 

HOUR

Regen 

Min. Fill 

Regen

Hour

Time-Hour 

PM 

Days To Regen

SET 

HOUR

Regen 

Min. Fill 

Regen

Hour

Time-Hour 

PM 

Days To Regen

SET 

HOUR

Regen 

Min. Fill 

Regen

Hour

Time-Hour 

PM 

Days To Regen

SET 

HOUR

Regen 

Min. Fill 

Regen

Hour

Time-Hour 

PM 

Days To Regen

Summary of Contents for PWFGAC1





















Reviews: