8
GENERAL USE CONDITIONS:
1: System to be used with municipal or well water sources treated and tested on regular basis to insure bacteriological safe quality. DO
NOT use with water that is micro biologically unsafe or of unknown quality without adequate disinfection before or after the system.
Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
2: Operating Temperature:
Maximum 100
o
F (37.8
o
C)
Minimum 40
o
F (4.4
o
C)
3: Operating Water Pressure:
Maximum
85psi (5.98 kg/cm
2
)
Minimum 20psi (1.406 kg/cm²)
4: Maximum flow Rate:
0.50 gpm (1.89 lpm)
5: Rated Capacity:
600 Gallons (2,200 liters)
RECOMMENDED REPLACEMENT PARTS AND CHANGE INTERVAL:
Note: Depending on incoming feed water conditions replacement time frame may vary.
Description
Part
Number
Change
time
Frame
Stage 1: Sediment filter
7100331
6 Months or 600 gallons of water
Stage 2: Lead, Cyst, VOC Carbon block
7100451
6 Months or 600 gallons of water
This system has been tested according to NSF/ANSI Standard 53 for the reduction of the substances listed below. The concentration
of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for
water leaving the system, as specified in NSF/ANSI 53. Testing performed under standard laboratory conditions, actual performance
may vary.
Substance
Percent
Reduction
Influent Challenge
Concentration
(mg/L unless noted)
Maximum Permissible
Product Water
Concentration
ALACHLOR*
>98%
0.050
0.001
ATRAZINE*
>97%
0.100
0.003
BENZENE*
>99%
0.081
0.001
BROMODICHLOROMETHANE (TTHM)*
>99.8%
0.300 +/- 0.30
0.015
BROMOFORM (TTHM)*
>99.8%
0.300 +/- 0.30
0.015
CARBOFURAN (Furadan)*
>99%
0.190
0.001
CARBON TETRACHLORIDE*
98%
0.078
0.0018
CHLORDANE
0.04 +/- 0.10
0.002
CHLOROBENZENE (Monochlorobenzene)*
>99%
0.077
0.001
CHLOROFORM (TTHM)*
>99.8%
0.300 +/- 0.30
0.015
CRYPTOSPORIDIUM (see Cyst)
99.99%
minimum 50,000/mL
99.95%
CYST
99.99%
minimum 50,000/mL
99.95%
CHLOROPICRIN
0.015
0.0002
2, 4-D*
98%
0.110
0.0017
DBCP (see Dibromochloropropane)*
>99%
0.052
0.00002
1,2-DCA (see 1,2-DICHLOROETHANE)*
95%
0.088
0.0048
1,1-DCE (see 1,1-DICHLOROETHYLENE)*
>99%
0.083
0.001
DIBROMOCHLOROMETHANE
(TTHM;Chlorodibromomethane)*
>99.8%
0.052
0.00002
DIBROMOCHLOROPROPANE (DBCP)*
>99%
0.004 +/- 0.10
0.0002
o-DICHLOROBENZENE (1,2 Dichlorobenzene)*
>99%
0.080
0.001
p-DICHLOROBENZENE (para-Dichlorobenzene)*
>98%
0.040
0.001
1,2-DICHLOROETHANE (1,2-DCA)*
95%
0.088
0.0048
1,1-DICHLOROETHYLENE (1,1-DCE)*
>99%
0.083
0.001
CIS-1,2-DICHLOROETHYLENE*
>99%
0.170
0.0005
TRANS-1,2- DICHLOROETHYLENE*
>99%
0.086
0.001
1,2-DICHLOROPROPANE (Propylene Dichloride)*
>99%
0.080
0.001
CIS-1,3- DICHLOROPROPYLENE*
>99%
0.079
0.001
DINOSEB*
99%
0.170
0.0002
EDB (see ETHYLENE DIBROMIDE)*
>99%
0.044
0.00002
ENDRIN*
99%
0.006 +/- 0.10
0.002
Watts Pure Water
8716 W Ludlow Drive Suite #1
Peoria, AZ 85381
1-(800)-224-1299
Performance Data Sheet
PWDWLCV2
