7
Maintenance
UV Lamps have a
1 year (9000 Hour) life span
under normal oper-
ating conditions.
Quartz sleeves should be cleaned with vinegar, citric acid, or a lime
scale removing chemical annually, and replaced no less than once
every 3 years. If the quartz sleeve can not be cleaned, or if it is dis-
colored, is must be replaced.
Pre filters should be maintained according to the manufacturer's
instructions to ensure feed water requirements within this manual are
met.
Parts List
ITEM QTY.
ORDERING CODE
DESCRIPTION
1a
1
-
UV CHAMBER 2.5" OD 2 GPM 3/8" MNPT FOR A SERIES
1b
1
-
UV CHAMBER 2.5" OD 6 GPM 3/4" MNPT FOR A SERIES
1c
1
-
UV CHAMBER 2.5" OD 8 GPM 3/4" MNPT FOR A SERIES
1d
1
-
UV CHAMBER 2.5" OD 12 GPM 1" MNPT FOR A SERIES
2a
1
7100169
UV QUARTZ SLEEVE FOR 2 GPM 330MM X 24.5MM A SERIES
2b
1
7100170
UV QUARTZ SLEEVE FOR 6 GPM 530MM X 24.5MM A SERIES
2c
1
7100171
UV QUARTZ SLEEVE FOR 8 GPM 680MM X 24.5MM A SERIES
2d
1
7100172
UV QUARTZ SLEEVE FOR 12 GPM 910MM X 24.5MM A
SERIES
3
1
7300824
UV QUARTZ SLEEVE O-RING FOR A SERIES
4a
1
7100163
UV LAMP FOR 2 GPM A SERIES
4b
1
7100164
UV LAMP FOR 6 GPM A SERIES
4c
1
7100165
UV LAMP FOR 8 GPM A SERIES
4d
1
7100166
UV LAMP FOR 12 GPM A SERIES
5a
1
7300820
UV CONTROLLER ASSEMBLY FOR 2 GPM A SERIES USA
120V PLUG WITH STRAIN RELIEF FOR QUARTZ SLEEVE NUT
5b
1
7300821
UV CONTROLLER ASSEMBLY FOR 6-12 GPM A SERIES USA
120V PLUG WITH STRAIN RELIEF FOR QUARTZ SLEEVE NUT
5c
1
7300822
UV CONTROLLER ASSEMBLY FOR 2 GPM A SERIES EURO-
PEAN 220V PLUG WITH STRAIN RELIEF FOR QUARTZ SLEEVE
NUT
5d
1
7300823
UV CONTROLLER ASSEMBLY FOR 6-12 GPM A SERIES
EUROPEAN 220V PLUG WITH STRAIN RELIEF FOR QUARTZ
SLEEVE NUT
6
2
7300049
UV MOUNTING CLIPS FOR 2.5" CHAMBER
7
1
7300825
QUARTS SLEEVE NUT 2 PIECE WITH GROUND ADAPTOR
AND TEFLON WASHER
NOTICE