![background image](http://html1.mh-extra.com/html/watts/lync-element-q/lync-element-q_installation-and-operation-manual_3835369102.webp)
Element
SECTION 10: The Electronic Operating System (EOS)
L-OMM-0003_A
• 10/8/2021 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
102
of
157
5. Exit the menu by pressing the
HOME
button.
6. Use the
NEXT ITEM
or
ITEM BACK
buttons to navigate to the
SOURCE
menu.
7. Enter the
SOURCE
menu.
8. Use the
NEXT ITEM
or
ITEM
BACK
buttons to navigate to the
VENT TYPE
menu.
9. Using the
UP
or
DOWN
arrow buttons, select between the four choices: PVC (default setting),
PPS, CPVC or SS.
10. To save, use the
NEXT ITEM
or
ITEM BACK
buttons or press the
HOME
button.
11.5.7 Changing the Operating Setpoint (USER Level Access)
The unit operates to satisfy the stored water temperature setpoint of the EOS control. The value
of the controls’ setpoint is the desired stored tank water temperature. Elements ship with a
factory setpoint of 120⁰F.
Although the setpoint can be displayed in the VIEW menu, it is necessary to enter the
CONTROL SYSTEM
MENU in order to make adjustments to the water heater’s setpoint and
other operational parameters.
To Change the Operating Setpoint:
1. From the VIEW MENU, press and hold the
HOME
button for 3 seconds to enter the Control
System Menu. The first menu displayed is the SETUP MENU.
2. Touch the
ENTER
button to display the SETPOINT MENU.
3. Adjust the setpoint value using the
UP
and
DOWN
arrow buttons.
4. To save the new value, touch the
NEXT ITEM
or
ITEM BACK
buttons or exit the menu by
pressing the
HOME
button.
Figure 77 - Changing the Setpoint
11.5.8 Setting the Real Time Clock (User & Installer Level Access)
The TIME MENU allows the user to program the time of day, the date and the year. A 12 or 24
hour time clock as well as daylight saving time can be selected. When selected, the time clock
can be displayed in the VIEW MENU.
1. Press and hold
HOME
button for 3 seconds to enter
CONTROL SYSTEM
Menu. Use the
NEXT ITEM
button to scroll to the
TIME
menu. Press
ENTER
button to enter
TIME
menu.
2. Use the
NEXT ITEM
button to move to the first screen. Use the UP & DOWN arrow buttons
to set the hour, then press the
NEXT ITEM
button to enter the value and move to the minute.