6
5. Tap
Pair Sensor
, then type a name or location for the sensor and tap
Enter
.
6. Press the button on the top of the leak sensor to complete the process. You have
30 seconds to link the H2iQ E800 system to the sensor before it returns to
normal. The LED on the sensor will blink green during the pairing process.
7. After the sensor is paired, you may move the sensor to the desired location.
LED Indicator
The light on the top of the leak sensor provides visual information about the status of
the unit.
LED Color
Status
Description
Green
Blinking
Sensor not linked to H2iQ E800 system
Green
Steady
Sensor linked to H2iQ E800 and operating normally
Red
Blinking
Low battery
Red
Steady
Error has occurred with the sensor
Red and Green
Blinking
Leak detected
Leak Sensor Test
After pairing your leak sensor(s) to the H2iQ E800 system, you can test each leak
sensor by performing a simple test.
Place the leak sensor in a bowl with about 1/16" of water. You only need enough water
to make contact with the two brass pins on the bottom of the sensor.
