5
Activating the Sensor
1. To activate the leak sensor, press the button located in the center of the top of
the unit for 5 seconds. You will see a green blinking LED light below the button,
indicating that the sensor is operational but not paired with an H2iQ
All-in-One
Whole Home Water Protection System yet.
2. Place the sensor near the base of the H2iQ E800 system.
3. Look at the touch screen display on the H2iQ E800 and select
Leak Sensor
.
4. When the Integrated System Leak Sensor screen appears, slide the button to the
On
position, select the first available sensor in the list and tap
Manage Sensors
.
Sensor Button
