Watts FEBCO 850 Small Series Manual Download Page 8

Repair Kits

Before contacting the local FEBCO parts distributor, write down the 

following information to have on hand when placing the order. The 

serial number located on the assembly ID plate can assist in ordering 

the proper kit.
•  Item number and name. Locate the number and name of the item 

in the “Parts” section.

•  Valve size. Verify the size of the valve that the item is to be used on.
•  Model number. Record the full model number found on the  

assembly ID plate.

•  Kit number. Use the tables below to find the number of the kit 

containing the item.

RUBBER PARTS KIT

1/2"

3/4"

1"

11/4"

11/2"

2"

Part No.

905-342

905-342

905-343

905-344

905-344

905-344

Item

Description

Qty

Item

Description

Qty

2.2

O-ring

1

5

Seal Disc

2

3.1

O-ring

2

CHECK MODULE ASSEMBLY

1/2"

3/4"

1"

11/4"

11/2"

2"

Part No.

905-347

905-347

905-349

905-351

905-351

905-351

Item

Description

Qty

Item

Description

Qty

3

Seal

1

5.1

Disc Retainer

1

3.1

O-ring

1

5.2

Round HD Screw

1

4

Poppet

1

6

Spring

1

5

Seal Disc

1

7

Guide

1

SINGLE POPPET KIT

1/2"

3/4"

1"

11/4"

11/2"

2"

Part No.

905-339

905-339

905-340

905-341

905-341

905-341

Item

Description

Qty

Item

Description

Qty

4

Poppet

1

5.1

Disc Retainer

1

5

Seal Disc

1

5.2

Round HD Screw

1

All sizes of each kit or assembly include the items listed.

Add-on/Retrofit Sensor Connection Kit

ORDERING CODE

ADD-ON/RETROFIT KIT

DESCRIPTION

88009430

FP-FBF-BMS/IMS-FZ

BMS/IMS Freeze Sensor Connection Kit

Includes freeze sensor in mounting clip, activation module with mounting  

hardware, wire nuts (2), and power adapter. Use this kit to add an indicator  

of the freeze threshold for PVB assemblies in a BMS/IMS configuration.

Limited Warranty:

 FEBCO (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.  

In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.  

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT.  THE COMPANY MAKES NO OTHER 

WARRANTIES, EXPRESS OR IMPLIED.  THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special 

or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting from 

labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control.  

This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.  
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages.  Therefore the above 

limitations may not apply to you.  This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State.  You should consult applicable state laws to 

determine your rights.  

SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

USA:

  T: (800) 767-1234 • FEBCOonline.com

Canada:  

T: (888) 208-8927 • FEBCOonline.ca

Latin America: 

T:

 

(52) 55-4122-0138 • FEBCOonline.com

RP/IS-F-850S   2346 

980057 

© 2023 Watts

Summary of Contents for FEBCO 850 Small Series

























Reviews: