36
to confirm.
The message “
Yes
” should be displayed; the value will
be stored in the internal memory.
If you need to erase a calibration press on the escape
key
(
)
.
The old value will be erased and the message “
no
” will
be displayed.
* Pay attention:
Only the heating element driven by the thermostat must
be used during the complete step of the calibration.
05
OutC
,
AMbC
,
FlrC:
Calibration of the external
wired probe
Same calibration method as described in parameter
“04 AirC” above.
06
HG:
Anti-freeze temperature used in Holiday mode
Default value 10°C.
Use the
(-)
or
(+)
keys to change the anti-freeze setting
temperature. Then press
(Ok)
to confirm.
07
ITCS
:
YES, no
The
Intelligent Temperature Control System
will
activate your installation in advance (2 hours
maximum) to assure the desired temperature at the
Summary of Contents for BT DP-01
