20
PKI/EKI-IM-DE-B-EN-01-23 Rev.0
NOTE
Lifting slings are factory-fitted for dimen-
sions with high weights. They are de-
signed exclusively for the weight of the
actuator and must not be used for lifting
the automatic valve!
The products must be handled, transported
and stored with care:
•
There is no liability of the manufacturer
for transport within the customer's ter-
ritory or to the individual places of use.
•
The products should be transported in
their original packaging or on a pallet (or
similarly supported) to the installation
site and unpacked immediately before
installation.
•
When storing before installation, keep
the products in a closed room and pro-
tect them from harmful influences such
as dirt or moisture.
•
The products must be stored in their
original packaging and, if necessary,
with the appropriate protective covers.
•
In case of a longer storage period, the
pneumatic rotary actuator must be op-
erated at least once a year.
•
Proper disposal of the packaging is the
responsibility of the customer.
Summary of Contents for bar PKI
