ENGLISH
DSBA3600 • Rév. 18/07/2019
UK
DESCRIPTION
These electric actuators have been designed to perform the control of a valve with 90° rotation. Please consult us for any
different application. We cannot be held responsible if the mentioned actuators are used for any other purpose.
TRANSPORT AND STORAGE
The forwarding agents being held as responsible for damages and delays of the delivered goods, the consignees are
obliged to express if applicable their reserves, prior to accept the goods. The goods delivered directly ex works are
subject to the same conditions.
The transport to the place of destination is carried out by using rigid packing material.
The products must be stored in clean, dry, and ventilated places, preferably on appropriate palettes or shelves. Actu-
ators should not be stored upside down.
MAINTENANCE
Maintenance is ensured by our factory. If the supplied product does not work, please check the wiring according to
the electric diagram as well as the power supply of the electric actuator in question.
For any question, please contact our after-sales service.
To clean the outside of the actuator, use a lint and soapy water. DO NOT USE ANY CLEANING PRODUCT WITH
SOLVENT OR ALCOHOL.
WARRANTY
Our products are thoroughly tested and set in factory.
These products are 3-year warranty from the manufacturing site delivery date or 50,000 actuations against all types of
manufacturing and material faults (operating time and model class according to standard CEI34).
The said guarantee covers solely replacement or – at our full sole discretion - repair, free of charge, of those compo-
nents of the goods supplied which in our sole view present proven manufacturing defects.
This warranty excludes any damage due to normal product usage or friction and does not include any modified or
unauthorized repair for which we will not accept any request for damage (either direct or indirect) compensation (for
full details see our website).
The guarantee does not cover the consequences of breakdown and excludes any payments for indemnities. The ac-
cessories, consumables (batteries…) and adaptations are excluded from the guarantee. In the case where a custom-
er has not proceeded to payments within the agreed period, our guarantee will be suspended until the delayed pay-
ments have been received and with the consequence that this suspension will not prolong the guarantee period in
any case.
All sales subject to our terms to be found on our website.
RETURN OF GOODS
When the actuator receives his actuator, he must check its conformity according to its definition.
The acceptance of the goods by the purchaser disclaims the supplier of all responsibility if the purchaser discovers
any non-conformity after the date of acceptance. In such case, the repair cost will be borne by the purchaser who will
also exclusively bear all financial consequences of any resulting damages. Returned goods will only be accepted if our
prior agreement has been given to this procedure : the goods must be sent free of all cost and being shipped solely
and in their original packing. The returned goods will be credited to the purchaser with a reduction of
40% on the
unit’s price charged in accordance with the original invoice of the returned goods.
SAFETY INSTRUCTIONS
(To be read prior to the installation of the product
)
The electric power supply must be switched-off before any intervention on the electric actuator (i.e. prior demounting
its cover or manipulating the manual override knob).
Any intervention must only be carried out by a qualified electrician or persons instructed in accordance with the regu-
lations of electric engineering, safety, and all other applicable directives.
Strictly observe the wiring and operation instructions as described in the manual: otherwise, the proper working of the
actuator can not be guaranteed anymore. Verify that the indications given on the identification label of the actuator
fully correspond to the characteristics of the electric supply.
Any other use than that described by the manufacturer jeopardizes the protection provided by this apparatus.
MOUNTING INSTRUCTIONS
(To be read prior to the installation of the product
)
Do not mount the actuator less than 30 cm from an electromagnetic disturbance source.
Do not position the equipment so that it is difficult to operate the disconnecting device.
Respect all safety rules during fitting, dismantling and porting of this apparatus.
