background image

 

10

 

ES-A-ACV-LF985GD  2115 

© 2021 Watts

LEAD FREE

*

Inlet

B

A

Dimensions

SIZE

DIMENSIONS

WEIGHT

A

B

in.

in

mm

in

mm

lbs.

kgs.

 

1/4

2

 

11/16

68 

1

 

11/16

43 

1.7

0.77

 

3/8

2

 

11/16

68 

1

 

11/16

43 

1.7

0.77

 

1/2

76 

51 

1.7

0.77

 

3/4

3

 

5/16

84 

2

 

5/16

59 

1.7

0.77

Model LF60-1

Y-Pattern Strainer

Size: 

1/4

" – 

3/4

" NPT

Model LF60-1 Y-Pattern Strainers are used to filter the fluid pass-

ing through the pilot circuit, and provide protection to pilot circuit 

speed controls and pilots. The filter element can be accessed for 

cleaning by removing the clean-out cap, or may be cleaned by 

installing an optional "blow-down" ball valve.  

* The wetted surface of this product contacted by consumable water 

contains less than 0.25% of lead by weight.

Body Material: 

    Lead Free Copper Silicon Alloy 

 

  CF8M (316) Stainless Steel (optional)

Retainer Cap:

 

  Lead Free Copper Silicon Alloy

Cap Gasket:

  

EPDM

Pressure Rating:

 

    400psi (27.6 bar)

Filter Element: 

    304 Stainless Steel

Mesh Options:

 

  60 Mesh (standard) 

 

  100 Mesh (optional)

Specifications

Model LF60-1

ACV Standard Components - Series LF985GD

Summary of Contents for AMES LF685GD Series




















Reviews: