![background image](http://html2.mh-extra.com/html/watts/aerco-modulex-ext-series/aerco-modulex-ext-series_user-manual_3936946109.webp)
Modulex EXT Commercial Series Boilers User Manual
CHAPTER 7: Troubleshooting
OMM-0095_0H
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
Page
109
of
144
GF-139
Phone: 800-526-0288
09/15/2017
CHAPTER 7:
TROUBLESHOOTING
7.1 E8 CONTROLLER FAULT CODES
Fault codes are displayed in the upper right hand section of the E8 Controller display (see
Figure 7-1). Use
Table 7-1
(next page) to determine the fault message. There are codes for the
following three different devices:
•
E8 Controller:
These are divided into four basic categories: PCB element faults, system
manager faults, communication faults, and internal faults. These fault codes are shown in
Table 7-2
.
•
BCM (Boiler Control Module):
These fault codes are shown in
Table 7-3
.
•
BMM (Burner Management Module):
These fault codes are shown in
Table 7-4
.
Figure 7-1: E8 Fault Code Location
NOTE:
When interpreting fault codes in the E8 display that refer to the E8 controller itself, the code
number is directly referenced to a fault description in Table 7-2.
Displayed fault codes not listed in Table 7-2 refer to devices other than the E8 controller, such
as the Boiler Management module (BMM) or Burner Controller Module (BCM). Use Table 7-1
(and the formula described below the table) to arrive at a fault number, which can be looked up
in Tables 7-3 and 7-4 for the fault description.
FAULT CODE