background image

1.

  Remove the four bolts that hold the relief valve cover  

 

in place.

2.

  Remove the cover. The stainless steel adapter, with o-ring  

 

attached will be free to be removed simultaneous with the  

 

removal of the cover. Pull out the relief valve assembly.  

 

Note:

 the spring tension in the relief valve assembly is  

 

contained in the design of the relief valve; therefore, the  

 

relief can be removed in a one-piece spool-type assembly.

3. 

The relief valve seat and disc may be cleaned without  

 

disassembly of the relief valve assembly. If it is determined  

 

that the relief valve diaphragm and/or disc should be  

  replaced, the relief valve module can be readily  

 

disassembled without the use of special tools.

Repair Kits

Relief Valve Kits

 Order Code No. 

Kit No. 

Size in. 

mm

 

0887126 

RK 909 VT 

3

4

 – 1

 20-25

 

 

0887138 

RK 909 VT 

1

1

4

 – 2

 32-50

Kit includes:

 Relief valve assembly, Seat, Seat o-ring, Cover o-ring 

and lubricant.

Rubber Parts for Relief Valve

 

0887131 

RK 909 RV 

3

4

 – 1

 20-25

 

 

0887141 

RK 909 RV 

1

1

4

 – 2

 32-50

Kit includes:

 Diaphragm, Disc assembly, Seat o-ring, RV o-ring, 

Piston o-rings, Cover o-ring and lubricant.

Seat Kits for Relief Valve

 

0887372 

RK 909 SV 

3

4

 – 1

 20-25

 

 

0887371 

RK 909 SV 

1

1

4

 – 2

 32-50

Kit includes:

 Seat, Seat o-ring, Piston o-ring and lubricant. 

Note:

 1

1

4

" - 2" (32-50mm) 909/909M1 share a common kit.

To Prevent Shaft Damage Assemble As Shown:

Caution:

 If cover will not press against body, assembly is crooked and tightening bolts will bend shaft. Do not force the cover into 

place as damage may result from misalignment.

Figure 1

Figure 2

Figure 3

Figure 1:

To assemble the Relief Valve Assembly 

have a screwdriver ready.

Figure 2:

Depress the Relief Valve Assembly, 

carefully guiding it against the two pound 

spring load. When properly aligned, the 

piston is in the cylinder bore. Insert the 

screwdriver as shown.

Figure 3:

The Relief Valve Assembly is held 

encapsulated by the screwdriver. You 

should now have both hands free to 

bolt down the cover. Insert and snug 

two bolts 180° apart to hold the cover. 

Finish inserting the remaining bolts and 

snug up evenly, alternating until secure. 

Remove the screwdriver.

Disc Assembly

Piston 

O-ring

Relief Valve 

Assembly

RV O-Ring

Stem

Seat

Body

Cover

Diaphragm

Piston

6

Cover

Seat 

O-ring

Size 

3

4

” – 1”

Disc Assembly

(2) Piston 

O-rings

Relief Valve 

Assembly

(2) RV O-Rings

Stem

Seat

Diaphragm

Piston

Seat 

O-ring

Size 1

1

4

" – 2" (32-50mm)

For further details contact your local technical sales 

representative, see back page. 

Servicing the Relief Valve

 3

/

4

" to 2"

Summary of Contents for 909 Series









Reviews: