background image

Size: 

3

8

", 

1

2

Hood

Bonnet

O-ring

Vent 

O-ring

Body

Retainer

Check 

Assembly

Hood Screws 

(2 Req'd)

Vent  

Spring

Air Bleed Screw 

Bleed O-ring  

(not shown)

Shutoff 

Valve Assy. 

(2 Req'd)

Test 

Cock

Size: 

3

4

", 1"

Vent O-ring

Retainer

Hood 

Screw

Hood

O-ring

Bonnet

Body

Vent  

Spring

Check 

Assembly

Test 

Cock

Pressure — Temperature

Working Temperature: 33°F – 180°F (0.5ºC – 82ºC) 

Maximum Pressure: 150psi (10.3 bar) 

Minimum Pressure: 8psi (55 kPa)

RP-IS-008QT   1319 

EDP# 1915125 

© 2013 Watts

USA:

 Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com

Canada: 

Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca 

Limited Warranty:

 Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of 

original shipment.  In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.  

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT.  THE COMPANY MAKES NO OTHER 

WARRANTIES, EXPRESS OR IMPLIED.  THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special 

or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting 

from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no 

control.  This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.  

Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages.  Therefore the above 

limitations may not apply to you.  This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State.  You should consult applicable state laws to 

determine your rights.  

SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

A Watts Water Technologies Company

WARNING:

 This product contains chemicals known to the 

State of California to cause cancer and birth defects or 

other reproductive harm.

For more information: www.watts.com/prop65

For repair kits and parts, refer to our Backflow 

Prevention Products Repair Kits & Service Parts 

price list PL-RP-BPD found on 

www.watts.com.

Summary of Contents for 008QT Series

Page 1: ...f the backflow preventer is recommended to prevent fouling of the check assembly and resultant spillage from the valve during start up and repressuring Testing For field testing procedure refer to Watts installation sheets IS TK DP DL IS TK 9A IS TK 99E and IS TK 99D found on www watts com For other repair kits and service parts refer to our Backflow Prevention Products Repair Kits Service Parts p...

Page 2: ...mpany shall not be responsible for any incidental special or consequential damages including without limitation lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly other costs resulting from labor charges delays vandalism negligence fouling caused by foreign material damage from adverse water conditions chemical or any other cir...

Page 3: ...stallation d un filtre en amont du dispositif anti refoulement est recommandée pour éviter les déversements dans la vanne anti retour et la contamination qui en résulterait lors de la repres surisation Essais Pour la procédure d essais sur le terrain reportez vous aux fiches d installation Watts IS TK DP DL IS TK 9A IS TK IS TK 99E et IS TK 99D disponibles sur www watts com Pour les autres kits de...

Page 4: ...eraient endommagés par suite du fonctionnement incorrect dudit produit d autres coûts résultant de frais de main d oeuvre de retards de vandalisme de négligence d une obstruction causée par des corps étrangers de dommages causés par une eau impropre des produits chimiques ou par tout autre événement échappant au contrôle de la Société La présente garantie est déclarée nulle et non avenue en cas d ...

Reviews: